What is the technical difference between GPRS and Edge ?
are they different only at the radio side or is the core nodes SGSN GGSN also different in Gprs and Edge?
Rating: +0
a
-
Pages
- GSM FAQ
- Buy Used GSM Switch and equipment
- GPRS node
- GSM Idle Mode of Handset
- How can a MMSC be aware whether a handset supports MMS or not?
- How many E1 in one STM 1
- How to Change SPC display format in Tektronix K12 and K15 ?
- Location Update Procedure in GSM
- Mobile Switching center MSC
- Mobile Visitor Location Register VLR function ?
- SSN Sub System Number
- What are different GSM interfaces ?
- What are STP’s?
- What are the Radio channels used in GSM ?
- What does the Annexb option with G729 mean ?
- What is a HLR or Home Location Register ?
- What is a signaling link ?
- What is E1 and where its using?
- What is EIR Equipment Identity Register ?
- what is erlang?
- What is Initial Address Message IAM ?
- What is The authentication Center (AUC) ?
- What is the difference between E1 and T1 ?
- What is the technical difference between GPRS and Edge ?
- why we are not able to make more then 16 slc in a low speed link.?
- IMS Network FAQ
- How can you break large trace or Protocol dump wireshark files ?
- How does subscriber REGISTRATION in IMS work ?
- IMS Implicit Registration
- RTCP RTP Control Protocol
- RTP Dynamic Payload and Static Payload
- SIP Content-Disposition: session; handling=required
- What is BGCF - Breakout Gateway Control Function
- What is RTP ?
- What is RTP used for ?
- What is S-CSCF ?
- What is SIP PRACK and 100rel
- What is SIP VIA header ?
- test kkkk
- Welcome
- GSM FAQ
-
Recent Comments