My 1st Blog

Here is how you can change the mode of a Zoom ADSL Modem

Suppose we want to change to ADSL2+ from multimode

Telnet into the modem from a DOS prompt by typing
telnet://10.0.0.2

login = admin
password = zoomadsl (i.e. the default password)
Login Successful
At the Command prompt $ type
modify dsl config adsl2plus

After you enter this command, enter “commit” and then “reboot”

Mode will now be set to adsl2+, you can also confirm this by going to the admin page of the modem located at http://10.0.0.2

Related posts:

1. Again Zoom adsl modem troubles It appears that my zoom x4 adsl modem has breathed...
2. Zoom modem Sync Problem My zoom adsl modem x4 is showing some abnormal behavior...
3. New Wireless router and ADSL Modem Combo Today I got TP LINK TD-W8910G Wireless ADSL2+ router, actually...
4. Default password for ZTE ZXDSL 831D Modem I really annoys when there is a problem with the...
5. Connecting TP-Link Wireless ADSL Router to External WAN You might have a DSL modem and router and wireless...
6. Command to Change Drive in DOS I always thought that I was a command line guru...